A) Relay Test Set

Single Phase Relay Test Set

Three Phase Relay Test Set

B) Protection Condition Analyser – PCA2

  • Tests entire system (relay, breaker, tripping supply, CT, wiring etc.) simultaneously.
  • Records full protection operation sequence (before, during and after fault, trip or reclose).
  • Captures critical ‘first trip’.
  • On or off-load injection test set or timer.
  • On or off-load breaker analyser.
  • General purpose oscillographic or event recorder with COMTRADE export.
  • Quick PC data transfer via USB drive.

Developed in conjunction with a major European utility, the PCA2 Protection Testing incorporates an advanced current injection unit together with a deep-memory high-resolution multichannel current/voltage/contact-event recorder. Both injection and recording functions can be used together or totally independently.

日本av电影网站All instrument control is via a bright high-resolution colour touch-screen. The built-in printer provides an instant hard-copy printout. The USB port enables quick and convenient results transfer to a PC via ‘pen drives’ as well as the use of a barcode reader for quick site data entry.

C) CT Testing Equipment


  • Industry leading test duration using patented simultaneous multi-tap measurements reduces testing time by 20% on multi-tap CT’s.
  • Increased measurement accuracy to support metering class CT testing.
  • Smallest and lightest 2kV secondary voltage injection unit on the market.
  • Integrated single phase relay test system.
  • General purpose substation secondary circuit testing with 300V & 60A generators.
  • Grouped testing: demagnetization, knee points, ratios, saturation curves, and more.
  • Measure all ratio’s and saturation curves on multi-tap CT’s with one lead connection.
  • Built-in insulation resistance testing.

The Megger MRCT Protection Testing is a light weight, robust, portable unit used to perform demagnetization, ratio, saturation, winding resistance, polarity, phase deviation, and insulation tests on current transformers. The MRCT Protection Testing automatically calculates ratio errors, saturation curves, and knee points. The MRCT provides a microprocessor-controlled variable voltage and current output and precision instrumentation for automatically testing single and multi ratio CTs, reducing testing time and increasing productivity. The MRCT will directly connect to multi ratio CT’s and perform all tests – saturation, ratio and polarity, winding resistance and insulation – on all taps with the push of a button and without changing leads.

日本av电影网站The MRCT can be controlled via Megger’s Smart Touch View Interface (STVI) controller, a full color, high resolution, LCD touch screen which allows the user to perform manual and automatic testing quickly and easily using the manual test screen, as well as using pre-constructed test routines. The large display permits the user to easily read all pertinent data while the test is being performed and provides the ability to view the current transformer’s saturation curve. The unit can also be configured to come without a Megger STVI and can be controlled via a laptop with Megger’s PowerDB software.

日本av电影网站Current transformers can be tested in their equipment configuration, such as being mounted in transformers, oil circuit breakers or switchgear. It is necessary for the equipment to be completely isolated from the electrical system prior to testing.


  • Quick and easy preparation of excitation curves for instrument transformers.
  •   Demagnetize current transformer cores.
  •   Conduct turn-ratio tests on voltage transformers.
  •   Two-hand control enhances personal safety.

日本av电影网站When power systems are put into operation or when faults occur, it becomes necessary to check the instrument transformers to make sure that they are providing test instruments and protective relay equipment with the correct outputs.

MAGNUS™ Protection Testing permits you to prepare excitation curves for instrument transformers quickly and easily.

MAGNUS Protection Testing is also used to demagnetize current transformer cores and to conduct turn-ratio tests on voltage transformers. Even though it weighs only 16 kg (35 lbs), it provides 1 A at 2.2 kV. Two-hand control enhances personal safety.

日本av电影网站As standard, MAGNUS is delivered with a special high-voltage cable and a robust transport case.

D) Primary Injection Test Set


  • Modular design to permit optimal user configuration of output current vs. unit size.
  • Compact transport cart facilitates portability into switchgear rooms with limited space.
  • Unique I/30 function allows the current to be pre-set using low current to prevent test sample heating, thus eliminating corruption of test result.

ODEN AT Protection Testing powerful test system is designed for primary injection testing of protective relay equipment and circuit breakers. It is also used to test the turns ratio of current transformers and for other applications that require high variable currents.


  • Most advanced primary current injection test system to simplify all types of switchgear and CT commissioning, ground grid, circuit breaker testing and more.
  • Up to 5000 A output current.
  • Two units, each of about 20 kg, makes it easier to carry.
  • Unique I/30 function allows the current to be pre-set using low current to prevent test sample heating, thus eliminating corruption of test result.

INGVAR Protection Testing is designed for primary injection testing of protective relay equipment and circuit breakers. It is also used to test the turns ratio of current transformers and for other applications that require high variable currents.

The system consists of a control unit and a current unit. The two parts are portable, and INGVAR can be quickly assembled and connected.

The control unit has many advanced features – a powerful measurement section for example, that can display turns ratio as well as time, voltage and current. A second measurement channel can be used to test an additional current or voltage. Current transformer turns ratio, impedance, power, power factor (cos φ) and phase angle are calculated and shown in the display. Current and voltage can be presented as percentages of nominal value. The fast-acting hold function freezes short-duration readings on the digital display when the voltage or contact signal arrives at the stop input, the object under test interrupts the current or injection is stopped.


  • Test relay protection systems and their current transformers together.
  • Current level maintained though test circuit resistance may rise due to heating.
  • Built-in timer to record protection relay operation.

日本av电影网站PCITS2000 Protection Testing Primary Current Injection Test Set is rugged, self-contained and designed for operation by one person.

The PCITS2000/2 is a two-wheeled unit (with a handle).

The test set has a separate hand-held controller connected by an expandable cable. This allows the operator to work close to a protective relay while controlling a test. The maximum output current is 2000 A a.c. at line frequency. By changing the range switch, half the rated output can be obtained at twice the voltage.

Additionally, a separate auxiliary voltage output of 250 V, 2 A a.c. or 125 V, 2 A a.c. is available for testing voltage operated relay coils or checking the magnetisation characteristics of current transformers. All outputs are fully variable and each test set has a nominal duty cycle when delivering full current and voltage. Continuous operation is possible at 40% of maximum current.


  • Compact and rugged.
  • Quick and easy to use.
  • Broad application range.
  • Excellent weight/performance ratio.

日本av电影网站These high-current supply units have two main fields of application. The first is to conduct primary tests on protective relays. A primary test shows whether all parts of the protection system are functioning together properly within the specified time limits under operating conditions. The second field of application involves conducting current tests on low-voltage circuit breakers and overcurrent devices.

Leave a Reply

日本av电影网站Your email address will not be published.Required fields are marked *